Occlusion development after premature loss of deciduous anterior teeth: preliminary results of a 24-month prospective cohort study.

OBJECTIVE: This study aimed to evaluate occlusion development after premature loss or extraction of deciduous anterior teeth, by means of a prospective cohort study. METHODS: Fifteen infants and children aged 1 to 5 years old were longitudinally assessed (with loss or extraction of deciduous anterior teeth [n = 9], and without tooth losses [n = 6]). Photographs and dental casts at the baseline and after 24 months of follow-up were performed. Dental casts were scanned, and linear measurements were made on the digitalized models (missing tooth space, arch perimeter, arch length, arch width, intercanine length and intercanine width). The t-test was used for groups comparisons (α = 0.05). RESULTS: Individuals' mean age at baseline was 2.93 (± 1.18) years. No statistically significant differences were observed in the missing tooth space in the group with tooth loss during the 24 months of follow-up (p > 0.05). Arch perimeter, arch length, arch width, intercanine length and intercanine width did not show differences between the groups (p > 0.05). Qualitative photographic evaluation revealed other changes in the dental arches and occlusion, such as exfoliation and eruption of deciduous teeth, eruption of permanent teeth, self-correction or establishment of malocclusion, among others. CONCLUSION: The results suggest that the premature loss of deciduous anterior teeth does not affect the perimeter, length and width of the dental arches; however, other alterations that lead to malocclusion could be established.

Occlusion development after premature loss of deciduous anterior teeth: preliminary results of a 24-month prospective cohort study

ABSTRACT Objective: This study aimed to evaluate occlusion development after premature loss or extraction of deciduous anterior teeth, by means of a prospective cohort study. Methods: Fifteen infants and children aged 1 to 5 years old were longitudinally assessed (with loss or extraction of deciduous anterior teeth [n = 9], and without tooth losses [n = 6]). Photographs and dental casts at the baseline and after 24 months of follow-up were performed. Dental casts were scanned, and linear measurements were made on the digitalized models (missing tooth space, arch perimeter, arch length, arch width, intercanine length and intercanine width). The t-test was used for groups comparisons (α = 0.05). Results: Individuals' mean age at baseline was 2.93 (± 1.18) years. No statistically significant differences were observed in the missing tooth space in the group with tooth loss during the 24 months of follow-up (p > 0.05). Arch perimeter, arch length, arch width, intercanine length and intercanine width did not show differences between the groups (p > 0.05). Qualitative photographic evaluation revealed other changes in the dental arches and occlusion, such as exfoliation and eruption of deciduous teeth, eruption of permanent teeth, self-correction or establishment of malocclusion, among others. Conclusion: The results suggest that the premature loss of deciduous anterior teeth does not affect the perimeter, length and width of the dental arches; however, other alterations that lead to malocclusion could be established.

RESUMO Objetivo: Este estudo teve como objetivo avaliar o desenvolvimento da oclusão após perda prematura ou extração de dentes decíduos anteriores, por meio de um estudo de coorte prospectivo. Métodos: Quinze bebês e crianças de 1 a 5 anos foram avaliados longitudinalmente (com perda ou extração de dentes anteriores decíduos [n = 9] e sem perdas dentárias [n = 6]). Foram realizadas fotografias e modelos dentais no início e após 24 meses de acompanhamento. Os modelos dentários foram escaneados e medidas lineares foram feitas nos modelos digitalizados (espaço dentário perdido, perímetro da arcada, comprimento da arcada, largura da arcada, comprimento intercaninos e largura intercaninos). O teste t foi utilizado para comparações entre grupos (α = 0,05). Resultados: A média de idade dos indivíduos no início do estudo foi de 2,93 (± 1,18) anos. Não foram observadas diferenças estatisticamente significativas no espaço dentário perdido no grupo com perda dentária durante os 24 meses de acompanhamento (p > 0,05). O perímetro da arcada, comprimento da arcada, largura da arcada, comprimento intercaninos e largura intercaninos não apresentaram diferenças entre os grupos (p> 0,05). A avaliação fotográfica qualitativa revelou alterações nas arcadas dentárias e na oclusão, como: esfoliação e erupção de dentes decíduos, erupção de dentes permanentes, autocorreção ou estabelecimento de má oclusão, entre outras. Conclusão: Os resultados sugerem que a perda prematura de dentes anteriores decíduos não afeta o perímetro, comprimento e largura das arcadas dentárias; entretanto, outras alterações que levam à má oclusão poderiam ser estabelecidas.

Influence of the maxillary dimensions and anterior teeth anatomy on the buccal impaction of upper permanent canines: A three-dimensional case-control study.

OBJECTIVE: The diagnosis of impacted upper permanent canines (IUPC) is a relatively common clinical finding. The aim of this study was to investigate the association of the buccal impaction of upper permanent canines with their dimensions and the maxilla bone base. MATERIAL AND METHODS: Cone beam computed tomography files of 66 patients were allocated into: impaction group (ICG/n=33/mean age 15.7±3.9 years), with 44 impacted canines by the buccal side; control group (CG/n=33/mean age 15.66±3.99 years), matched for age and sex, with 66 canines normally erupted. The following measurements were obtained from ICG and CG groups: linear and volumetric canine dimensions, linear measurements of upper permanent central and lateral incisors, measurements of the anterior perimeter and transverse segments of the maxilla. Independent Student's t-test was used for intergroup analysis with correction of Bonferroni (α=0,005). RESULTS: Higher values were found in the means of the variables regarding to the anterior teeth crowns in the ICG group, however, without a significant difference (P<0,005). The upper arch anterior perimeter of the individuals with canine impaction through buccal area was reduced compared to CG (P=0.001). CONCLUSIONS: It can be concluded that individuals with upper buccal impacted permanent canine showed a significantly smaller anterior perimeter of the maxillary arch when compared to the control group. Although greater canine mesiodistal diameter was found in this group, there is no statistical association with the occurrence of this condition.

Influence of the maxillary dimensions and lateral incisor anatomy on the palatal impaction of maxillary permanent canines: A three-dimensional case-control study.

OBJECTIVE: The diagnosis of impacted upper permanent canines (IUPC) is a relatively common clinical finding. The aim of this study was to investigate associations between the upper permanent canines palatal impaction, lateral incisors morphology and the maxilla bone base. MATERIAL AND METHODS: Cone-beam tomography files from 62 subjects were divided into 2 groups: impaction group (ICG/n=31; mean age 14.3±2.4) with 45 canines impacted on the palatal side and age- and sex-matched control group (CG/n=31; mean age 14.3±2.3), with 62 normally erupted canines. Linear and volumetric measurements of the lateral incisors, linear transversal measures and the maxillary anterior perimeter were taken. Independent Student's t-test was used for intergroup analysis with correction of Bonferroni. RESULTS: Significant differences were found for crown length and root diameter (buccal-palatal) (P<0.005). The maxillary anterior perimeter in the ICG was reduced in relation to the GC but not significantly (P=0.008). The transverse skeletal variables of the maxilla were equivalent in the intergroup comparison (P>0.005). CONCLUSION: Smaller dimensions in the crown length and in the upper permanent lateral incisors root buccal-palatal diameter were associated with the impaction of upper permanent canines on the palatal side. The maxillary transverse morphology did not show any association with the occurrence of this condition.

Three-dimensional micromorphology of human midpalatal suture and pterygomaxillary articular complex.

BACKGROUND: Sutures exist in the craniofacial area, and the pattern of maturation and synostosis of facial sutures is largely unknown. METHODS: For a comprehensive understanding of the three-dimensional circummaxillary suture micromorphology, human midpalatal suture (MPS) and pterygomaxillary articular complex from eight subjects' (five males, three females, 72-88 years old) autopsies were longitudinally scanned with microcomputed tomography. Additional histology was performed for hematoxylin and eosin staining. Sutural micromorphology was assessed by interdigitation index (II), obliteration index (OI) and obliteration number. Intergroup comparisons were performed with Kruskal-Wallis and Mann-Whitney U with Bonferroni correction (α = 0.005). Correlation with anteroposterior and craniocaudal gradients was assessed with Spearman's correlation test (α = 0.05). RESULTS: Maxillary region of MPS presented a higher II 1.50 (0.61) and obliteration number per slice 8 (9) (P < 0.005). OI was increased in palatomaxillary 35% (47%) followed by pterygopalatine suture 25% (49%) (P < 0.005). The II and OI of the MPS exhibited only a weak anteroposterior gradient, with relatively low correlations. Obliteration areas were found sporadically along the entire MPS. CONCLUSIONS: Based on these findings, it is conceivable that the success of nonsurgical maxillary expansion largely depends on individual variations in sutural morphology and maturation rather than appliance design.

Effect of cigarette smoke on aesthetic brackets: an in vitro study.

OBJECTIVE: The objective of this study was to evaluate the effect of cigarette smoke (CS) on physical and mechanical properties of ceramic, polycarbonate and alumina ceramic brackets. The null hypothesis tested was that aesthetic brackets would not be influenced by CS. METHODS: Ninety aesthetic brackets were allocated to three groups (n = 30): ceramic (GCE), polycarbonate (GCO) and alumina ceramic (GPS). Ten samples of each group were assigned to color and surface roughness analysis, performed before (T0) and after (T1) exposure to CS; and twenty samples were allocated into control and experimental groups (n = 10) (not exposed and exposed to CS, respectively) for shear bond strength test (SBS). Exposure to CS followed an adaptation of the method described by Le Mesurier. Colorimetric reading, surface morphology and roughness, SBS and adhesive remnant index (ARI) were assessed. Statistical analysis comprised independent and paired t-tests, ANOVA/Tukey and Fisher's exact tests (α = 0.05). RESULTS: Changes were observed in brackets' color (NBS: GCE = 2.4; GCO = 1.9; GPS = 2.1), surface roughness (ΔRa: GCE = 1.1 ± 0.8 µm; GCO = 1.9 ± 1.5µm; GPS = -0.3 ± 0.1 µm / ΔRz: GCE = 1.4 ± 1.0 nm; GPS = -0.5 ± 0.1 nm); and SBS (GPS - experimental = 221.8 ± 48.6 N) after exposure to CS (p< 0.05). CONCLUSIONS: Exposure, in vitro, of aesthetic brackets to CS resulted in changes of color to darker and more opaque shades, surface roughness alterations, and higher SBS values. ARI scores were not associated with exposure to CS.

Effect of cigarette smoke on aesthetic brackets: an in vitro study

ABSTRACT Objective: The objective of this study was to evaluate the effect of cigarette smoke (CS) on physical and mechanical properties of ceramic, polycarbonate and alumina ceramic brackets. The null hypothesis tested was that aesthetic brackets would not be influenced by CS. Methods: Ninety aesthetic brackets were allocated to three groups (n = 30): ceramic (GCE), polycarbonate (GCO) and alumina ceramic (GPS). Ten samples of each group were assigned to color and surface roughness analysis, performed before (T0) and after (T1) exposure to CS; and twenty samples were allocated into control and experimental groups (n = 10) (not exposed and exposed to CS, respectively) for shear bond strength test (SBS). Exposure to CS followed an adaptation of the method described by Le Mesurier. Colorimetric reading, surface morphology and roughness, SBS and adhesive remnant index (ARI) were assessed. Statistical analysis comprised independent and paired t-tests, ANOVA/Tukey and Fisher's exact tests (α = 0.05). Results: Changes were observed in brackets' color (NBS: GCE = 2.4; GCO = 1.9; GPS = 2.1), surface roughness (ΔRa: GCE = 1.1 ± 0.8 µm; GCO = 1.9 ± 1.5µm; GPS = -0.3 ± 0.1 µm / ΔRz: GCE = 1.4 ± 1.0 nm; GPS = -0.5 ± 0.1 nm); and SBS (GPS - experimental = 221.8 ± 48.6 N) after exposure to CS (p< 0.05). Conclusions: Exposure, in vitro, of aesthetic brackets to CS resulted in changes of color to darker and more opaque shades, surface roughness alterations, and higher SBS values. ARI scores were not associated with exposure to CS.

RESUMO Objetivo: O objetivo do presente estudo foi avaliar os efeitos da fumaça do cigarro (FC) nas propriedades físicas e mecânicas de braquetes cerâmicos, de policarbonato e de cerâmica de alumina. A hipótese nula testada foi de que os braquetes estéticos não seriam influenciados pela FC. Métodos: Noventa braquetes estéticos foram alocados em três grupos (n = 30): cerâmica (GCE), policarbonato (GCO) e cerâmica de alumina (GPS). Dez amostras de cada grupo foram designadas para análise de cor e rugosidade superficial, realizada antes (T0) e após (T1) exposição à FC, e vinte amostras foram alocadas nos grupos controle e experimental (n = 10) (não expostos e expostos à FC, respectivamente) para o teste de resistência ao cisalhamento (RC). A exposição à FC foi realizada de acordo com o método descrito por Le Mesurier. Leitura colorimétrica, morfologia e rugosidade de superfície, RC e índice de adesivo remanescente (ARI) foram avaliados. A análise estatística foi realizada por meio dos testes t independente e para amostras pareadas, ANOVA/Tukey e teste exato de Fisher (α = 0,05). Resultados: Foram observadas alterações na cor (NBS: GCE = 2,4; GCO = 1,9; GPS = 2,1), rugosidade superficial (ΔRa: GCE = 1,1 ± 0,8 µm; GCO = 1,9 ± 1,5 µm; GPS = -0,3 ± 0,1 µm / ΔRz: GCE = 1,4 ± 1,0 nm; GPS = -0,5 ± 0,1 nm) e RC (GPS - experimental = 221,8 ± 48,6 N) dos braquetes após exposição à FC (p< 0,05). Conclusões: A exposição in vitro de braquetes estéticos à FC resultou em mudanças na cor, para tons mais escuros e mais opacos; alterações na rugosidade superficial e maiores valores de RC. Os resultados do ARI não foram associados à exposição à FC.

Agreement among instruments of quantitative evaluation of the hard palate in children / Concordância entre instrumentos de avaliação quantitativa do palato duro em crianças

ABSTRACT Purpose To evaluate the agreement among instruments of the quantitative evaluation of hard palate. Methods This cross-sectional study was performed with a sample of 30 children aged 6 to 11 from Santa Maria, Southern Brazil. The instruments for palate measurements evaluated were: digital caliper, used directly in the oral cavity and in plaster casts, Korkhaus tridimensional bow, used directly in the oral cavity and in plaster casts, and Dolphin Imaging Software used for measurements in cone-beam computed tomography (CBCT). The agreement among different instruments was evaluated using the Intraclass Correlation Coefficient (ICC). Results The means of all transversal dimensions obtained by cone-beam computed tomography were lower than those of the other instruments - the agreement values in the width between the canines and in the width between the first molars were lower when comparing the cone-beam computed tomography and the other instruments. In the width between the first and second premolars, all comparisons showed acceptable agreement values. Good concordance values were obtained when comparing the palate depth at the second premolar region when using a bow divider inside the oral cavity and in the cast. Conclusion Most instruments presented satisfactory agreement in the measurements related to the transverse plane of the hard palate. However, when the vertical plane was evaluated, only the bow divider applied to both cast and oral cavity presented ideal agreement.

RESUMO Objetivo Avaliar a concordância entre instrumentos de avaliação quantitativa do palato duro. Método Este estudo transversal foi realizado com uma amostra de 30 crianças de 6 a 11 anos de Santa Maria, sul do Brasil. Os instrumentos de medidas do palato avaliados foram: paquímetro digital, utilizado diretamente na cavidade oral e em modelos de gesso, arco tridimensional Korkhaus, usado diretamente na cavidade oral e em modelos de gesso, e Dolphin Imaging Software utilizado para medições em tomografia computadorizada de feixe cônico (CBCT). A concordância entre os diferentes instrumentos foi avaliada por meio do Coeficiente de Correlação Intraclasse (ICC). Resultados As médias de todas as dimensões transversais obtidas pela tomografia computadorizada de feixe cônico foram menores do que as dos outros instrumentos - os valores de concordância na largura entre os caninos e na largura entre os primeiros molares foram baixos na comparação entre a tomografia computadorizada de feixe cônico e os demais instrumentos. Na largura entre o primeiro e o segundo pré-molar, todas as comparações apresentaram valores de concordância aceitáveis. Valores de concordância aceitáveis também foram obtidos ao comparar a profundidade do palato na região do segundo pré-molar com o uso de um divisor de arco dentro da cavidade oral e no gesso. Conclusão A maioria dos instrumentos apresentou concordância satisfatória nas medidas relacionadas ao plano transverso do palato duro. Porém, quando avaliado o plano vertical, apenas o divisor de arco aplicado tanto no gesso quanto na cavidade oral apresentou concordância ideal.

Does the premature loss of primary anterior teeth cause morphological, functional and psychosocial consequences?

Premature loss of primary anterior teeth in deciduous arches is a controversial topic in the literature, especially due to the lack of robust scientific evidence regarding the types and magnitudes of the consequences involved. Morphological, functional, and psychosocial problems may arise from untreated premature loss of primary incisors and canines. The morphological problems include impaction and eruption disturbances of permanent successors; inclination and/or extrusion of adjacent and antagonist teeth, respectively; midline deviation; and crowding. Functional complications, such as speech disorders, aesthetic problems, and development of non-nutritive habits may occur, resulting in psychosocial implications, including a decrease in self-esteem, and even being targeted for bullying. The current critical review aimed to present and discuss the evidence available in the literature about the etiology, characteristics, implications and interventions resulting from the premature loss of primary anterior teeth. It is of utmost importance that future studies be developed to support the clinical decisions made by dental professionals on this topic.

Comparison of feldspathic veneer surface treatments on ceramic bracket SBS, ARI and surface roughness after different debonding/polishing methods: An in vitro study.

OBJECTIVES: To analyse, in vitro, surface properties and the shear bond strength after debonding and polishing procedures of ceramic brackets directly bonded to 0.3-0.5-mm thick feldspathic veneers. MATERIALS AND METHODS: Fifty six feldspathic ceramic veneers samples (0.3 to 0.5-mm thick) were allocated into groups according to veneers surface treatment procedures: (S) glaze layer was retained; (SHF) hydrofluoric (HF) acid etch; (SOXA) Al2O3 sandblasting; and (SB) diamond burs roughening. Specimens were treated with silane Monobond N® and ceramic brackets bonded with Transbond XT®. Shear bonding strength (SBS) was assessed with a universal testing machine and ARI evaluated under a stereomicroscopic coupled to a digital camera. Remaining bonding composite was removed using a porcelain polishing kit and surface roughness assessed with a stylus profilometer. RESULTS: No statistically significant differences were identified for SBS among the study groups (S, SHF, SOXA and SB) (P>0.05). The majority of the specimens presented ARI scores 3 and 2 (P>0.05). All of the study groups presented increased surface roughness after debonding and polishing procedures (P<0.05), with significant greater values observed in SB group (RaF: 1.27±0.41; RzF: 6.23±1.82), (P<0.05). CONCLUSIONS: Surface treatment with hydrofluoric acid etch, Al2O3 sandblasting and diamond bur did not enhance SBS of orthodontic brackets bonded to ceramic veneers. Ceramic surfaces treated with diamond burs presented significantly increased roughness after adhesive removal.

Agreement among instruments of quantitative evaluation of the hard palate in children.

PURPOSE: To evaluate the agreement among instruments of the quantitative evaluation of hard palate. METHODS: This cross-sectional study was performed with a sample of 30 children aged 6 to 11 from Santa Maria, Southern Brazil. The instruments for palate measurements evaluated were: digital caliper, used directly in the oral cavity and in plaster casts, Korkhaus tridimensional bow, used directly in the oral cavity and in plaster casts, and Dolphin Imaging Software used for measurements in cone-beam computed tomography (CBCT). The agreement among different instruments was evaluated using the Intraclass Correlation Coefficient (ICC). RESULTS: The means of all transversal dimensions obtained by cone-beam computed tomography were lower than those of the other instruments - the agreement values in the width between the canines and in the width between the first molars were lower when comparing the cone-beam computed tomography and the other instruments. In the width between the first and second premolars, all comparisons showed acceptable agreement values. Good concordance values were obtained when comparing the palate depth at the second premolar region when using a bow divider inside the oral cavity and in the cast. CONCLUSION: Most instruments presented satisfactory agreement in the measurements related to the transverse plane of the hard palate. However, when the vertical plane was evaluated, only the bow divider applied to both cast and oral cavity presented ideal agreement.

In-vitro trabecular bone damage following mono- and bicortical mini implants anchorage in mini-implant assisted rapid palatal expansion (MARPE).

OBJECTIVES: To assess in-vitro trabecular bone damage following mono- and bicortical mini-implant (MI) anchorage in mini-implant assisted rapid palatal expansion (MARPE). MATERIAL AND METHODS: Sixteen self-drilling MI (four MARPE appliances) were distributed in two groups according to bone insertion (monocortical and bicortical) in bovine rib. The device was activated five times (0.5mm each). Trabecular bone damage was assessed using micro-CT scans made at baseline and after each activation by trabecular spacing parameter (Tb.Sp) (distance [mm] between the trabecular bone structure). These measurements were made in five different regions of interest (ROI) surrounding the screw (whole, superior, inferior, anterior and posterior). Two-way ANOVA with Tukey post-hoc analysis (α=0.05) was used to evaluate the effect of insertion type (monocortical vs. bicortical) and activation cycle (0-5) on trabecular damage. The time effect was evaluated using ANOVA-MR test effect with Bonferroni correction (α=0.003). The micro-CT images were also examined qualitatively. RESULTS: When analysing the individual ROIs, only the superior ROI had a significant difference (P<0.003) beginning at the fourth activation cycle. For the monocortical group, trabecular spacing was affected when the whole ROI was analysed beginning at the fourth activation cycle, while for the superior ROI, this difference became apparent beginning with the third activation cycle (P<0.003). For the qualitative analysis, it seems that only monocortical anchorage influences the trabecular bone in the superior area. CONCLUSIONS: Monocortical anchorage is more susceptible to bone damage around the MIs, with the superior (cervical) region most strongly affected.

Miniscrew-assisted rapid palatal expansion (MARPE): how to achieve greater stability. In vitro study.

OBJECTIVE: Assess the influence of mono- and bicortical anchorage and diameter of mini-implants (MIs) on the primary stability of these devices. METHODS: 60 self-drilling MIs were distributed in six groups according to diameter (1.5mm, 1.8mm or 2.0mm) and type of anchorage (monocortical and bicortical) in bovine rib. The primary stability was evaluated by insertion torque, micromobility and pull-out strength tests. ANOVA and/or Tukey analysis were used to conduct intergroup comparisons (p< 0.05). Non-parametric statistics (Kruskal-Wallis and Mann-Whitney) were performed when normality was not found (p< 0.05). RESULTS: MIs with larger diameters and bicortical anchorage showed greater primary stability regarding insertion torque (p< 0.05) and micromobility (p< 0.05). Only MI diameter had an effect on the pull-out strength test. Larger diameter MIs presented better retention in pull-out strength tests (p< 0.001), regardless of mono- or bicortical anchorage. CONCLUSIONS: MI primary stability is dependent on its diameter and type of anchorage. Bicortical anchorage showed greater stability when compared with monocortical anchorage, independently of other variables.

Miniscrew-assisted rapid palatal expansion (MARPE): how to achieve greater stability. In vitro study

ABSTRACT Objective: Assess the influence of mono- and bicortical anchorage and diameter of mini-implants (MIs) on the primary stability of these devices. Methods: 60 self-drilling MIs were distributed in six groups according to diameter (1.5mm, 1.8mm or 2.0mm) and type of anchorage (monocortical and bicortical) in bovine rib. The primary stability was evaluated by insertion torque, micromobility and pull-out strength tests. ANOVA and/or Tukey analysis were used to conduct intergroup comparisons (p< 0.05). Non-parametric statistics (Kruskal-Wallis and Mann-Whitney) were performed when normality was not found (p< 0.05). Results: MIs with larger diameters and bicortical anchorage showed greater primary stability regarding insertion torque (p< 0.05) and micromobility (p< 0.05). Only MI diameter had an effect on the pull-out strength test. Larger diameter MIs presented better retention in pull-out strength tests (p< 0.001), regardless of mono- or bicortical anchorage. Conclusions: MI primary stability is dependent on its diameter and type of anchorage. Bicortical anchorage showed greater stability when compared with monocortical anchorage, independently of other variables.

RESUMO Objetivo: Avaliar a influência da ancoragem mono e bicortical e do diâmetro dos mini-implantes (MIs) na estabilidade primária desses dispositivos. Métodos: 60 MIs autoperfurantes foram distribuídos em seis grupos, de acordo com o diâmetro (1,5 mm, 1,8 mm ou 2,0 mm) e tipo de ancoragem (monocortical e bicortical), e inseridos em costela bovina. A estabilidade primária foi avaliada pelos testes de torque de inserção, micromobilidade e resistência à tração. ANOVA e/ou análise de Tukey foram usadas para realizar comparações intergrupos (p< 0,05). Estatística não paramétrica (Kruskal-Wallis e Mann-Whitney) foi realizada quando a normalidade não foi encontrada (p< 0,05). Resultados: MIs com diâmetros maiores e ancorados bicorticalmente apresentaram maior estabilidade primária em relação ao torque de inserção (p< 0,05) e micromobilidade (p< 0,05). Apenas o diâmetro do MI influenciou os resultados do teste de resistência à tração. MIs de maior diâmetro apresentaram melhor retenção nos testes de resistência à tração (p< 0,001), independentemente da ancoragem mono ou bicortical. Conclusões: a estabilidade primária do MI é dependente de seu diâmetro e tipo de ancoragem. A ancoragem bicortical apresentou maior estabilidade quando comparada à ancoragem monocortical, independentemente das demais variáveis.

Does the premature loss of primary anterior teeth cause morphological, functional and psychosocial consequences?

Abstract Premature loss of primary anterior teeth in deciduous arches is a controversial topic in the literature, especially due to the lack of robust scientific evidence regarding the types and magnitudes of the consequences involved. Morphological, functional, and psychosocial problems may arise from untreated premature loss of primary incisors and canines. The morphological problems include impaction and eruption disturbances of permanent successors; inclination and/or extrusion of adjacent and antagonist teeth, respectively; midline deviation; and crowding. Functional complications, such as speech disorders, aesthetic problems, and development of non-nutritive habits may occur, resulting in psychosocial implications, including a decrease in self-esteem, and even being targeted for bullying. The current critical review aimed to present and discuss the evidence available in the literature about the etiology, characteristics, implications and interventions resulting from the premature loss of primary anterior teeth. It is of utmost importance that future studies be developed to support the clinical decisions made by dental professionals on this topic.

Influence of cigarette smoke on enamel color stability after orthodontic debonding: an in vitro study

Objective: The aim of this study was to evaluate the color stability of dental enamel exposed to cigarette smoke after orthodontic debonding. Methods: Thirty-two bovine incisors were allocated into control (C1 and C2) and experimental groups (n=8) according to distinct bonding protocols: with adhesive (B1) and without adhesive (B2) and exposure to cigarette smoke. Samples from B1, B2 and C2 were exposed to ten cycles of smoke in a specific and hermetic chamber while the C1 remained stored in artificial saliva. Color analysis was performed with a spectrophotometer according to the L*a*b* system. Intergroup comparisons and effect of time were estimated with ANOVA/Tukey and paired Student t tests, respectively (a=0.05). Results: Statistically significant color changes have not been observed in C1 (L*: -0.69 ± 0.80; a*: 0.36 ± 0.23; b*: 0.17 ± 0.50) and without adhesive (B2) (L*: -3.74 ± 2.85; a*: 0.93 ± 0,73; b*: 1.13 ± 1.16) through the study time (p>0,05). However, the group with adhesive (B1) presented significant color changes in L*:-5.55 ± 2.28, a*: 2.33 ± 0.77 and b*: 3.30 ± 1.37, what means, darker, greener and more yellow, respectively (p<0,05) and the control group that was exposed to the cigarette smoke (C2) presented significant color changes in L*: -1.72 ± 0.28 e b*: 1.82 ± 0.22, what means, darker and more yellow, respectively. Conclusion: Enamel color stability was affected by exposure to cigarette smoke after orthodontic debonding, especially when bonding protocolcomprised the application of primer adhesive.

Objetivo: O objetivo deste estudo foi avaliar a estabilidade da cor do esmalte dentário exposto à fumaça de cigarro após a descolagem ortodôntica. Métodos: Trinta e dois incisivos bovinos foram alocados nos grupos controle (C1 and C2) e experimental (n = 8) de acordo com protocolos de colagem ortodôntica distintos: com adesivo (B1) e sem adesivo (B2) e expostos à fumaça de cigarro. Amostras do B1, B2 e C2 foram expostas a dez ciclos de fumaça em uma câmara específica e hermética, enquanto o C1 permaneceu armazenado em saliva artificial. A análise da estabilidade de cor foi realizada com um espectrofotômetro de acordo com osistema L* a* b*. As comparações intergrupos e o efeito do tempo foram verificados com ANOVA / Tukey e testes t de Student, respectivamente (a=0,05). Resultados: Não foram observadas alterações de cor estatisticamente significativas no C1 (L*: -0,69 ± 0,80; a*: 0,36 ± 0,23; b*: 0,17 ± 0.50) e sem adesivo (B2) (L*: -3,74 ± 2,85; a*: 0,93 ± 0,73; b *: 1,13 ± 1,16) durante o tempo de estudo (p>0,05). No entanto, o grupo com adesivo (B1) apresentou alterações significativas de cor em L*: - 5,55 ± 2,28, a*: 2,33 ± 0,77 eb*: 3,30 ± 1,37, o que significa, mais escuro, mais verde e mais amarelo, respectivamente (p<0,05) e o grupo controle exposto à fumaça de cigarro (C2) apresentou alterações significativas de cor em L*: -1,72 ± 0,28 e b*: 1, 82 ± 0,22, o que significa, mais escuro e mais amarelo, respectivamente. Conclusão: A estabilidade da cor do esmalte foi afetada pela exposição à fumaça de cigarro após a descolagem ortodôntica, principalmente quando o protocolo de colagem incluía a aplicação de adesivo.